Customizable, computer-controlled photography modules for research applications.
Design the perfect system for repeatable imaging of your subject of interest.
All systems start with the open architecture Control Module (below) and can be configured to control a variety of flashes, LED modules and filter wheels for your specific imaging requirements. Build your own or use Canfield's imaging expertise.
- Intuitive SDK makes programming a breeze with common Serial Emulation Software like MatLab, ZOC and VBScript
- USB communication to computer
- Universal 100-240VAC input
- Power switch and indicator (front)
- Flash charge status indicators (front)
Lab Imaging System SDK- Lab Imaging System Sample Code
- Supports up to:
- 8 Flashes
- 6 LED Modules
- 3 Filter Wheels
- 2 SYNC IN (from camera/trigger sources)
- 2 AUX SYNC (assignable to sync 3rd party strobes)
Available Modules
700M CR-Flash
- Variable output is automated via the Controller
- Output range of 2-35 Joules
- 1/4-20 tapped mounting holes on all four sides
- Accepts 50mm and 2 inch square filters up to 5mm thick
2100 IntelliFlash
- Variable output automated via the Controller
- Output range of 5-105 Joules
- Mounting bracket
LED Module
- Variable output automated via Controller
- 6500K color temperature
- 1/4-20 tapped mounting hole
Camera Filter Wheel
- 5 positions
- Accepts 43mm circular threaded filters
- Automated via Controller
- Enclosed housing with glare reducing Front Baffle
- 1/4-20 tapped holes in the Mounting Bracket
- Mounting Bracket can be used on any side
Studio Strobe Filter Wheel
- 4 positions
- Accepts 50mm and 2 inch square filters up to 5mm thick
- Enclosed housing
- Mounts directly to the front of studio strobe (Picolite)
- Automated via Controller
Related Products
