Complete 3D Imaging Solution for Body, Breast, and Face
Capture face, breast, and body images in ultra-high resolution 3D, and show your patients the exciting possibilities of their simulated aesthetic procedures.
Now with 360° body imaging.
Capture face, breast, and body images in ultra-high resolution 3D, and show your patients the exciting possibilities of their simulated aesthetic procedures.
Now with 360° body imaging.
With ultra-high resolution color image capture, VECTRA XT assures razor sharp definition of the smallest details. Its elegant design complements your space. With a wall projection of less than 17", it takes up hardly any floor space.
Engage in a streamlined, persuasive consultation as you view the three-dimensional image from any angle, zoom in for a closer look, superimpose the simulation over the pre-op, compare side-by-side, or fade between the two.
Increased patient referrals and drive greater media exposure with state-of-the-art assessment tools and realistic 3D results.
Use your patient's own image to explore possible outcomes, educate them about their options, explain limitations, and set appropriate expectations.
Show the difference between the likely outcome of a single procedure or by combining multiple procedures.
Visualize your patient's expectations, arrive at a shared understanding of treatment objectives, and help your patient decide on the best possible treatment plan.
Automated measurements, some only possible with 3D technology, help your patients understand their current condition.
Gray mode reveals contours, presenting opportunities for corrective procedures.
Canfield's proprietary RBX® technology separates the unique color signatures of Red and Brown skin components for unequaled visualization of skin conditions.
Automatic volume difference measurement with one click. Visualize the degree of contour change with a color distance map.
A front and back view of the patient are automatically stitched together into a single, seamless wraparound image, providing a more complete visualization of the structural and aesthetic appearance of a patient's body.
Breast Sculptor's patient education module provides a series of checklist-style customizable disclaimers with relevant visual tools and measurements to streamline your informed consent process.
Slider-based dorsal height adjustment for instantaneous three-dimensional rhinoplasty simulation.
Select breast implants from the product catalogs you normally use.
Sculptor's dynamic soft tissue modeling technology generates actual 3D models of the implants you select and calculates a realistic outcome based upon gravity, the shape and placement of the selected implant.
The Mastopexy interface in Breast Sculptor closely models the way you perform surgery, including adjustable incisions used to simulate the excising of skin.
Simulate removing volume from, or adding volume to the face and body.
Visualize your patient's hopes and expectations with Sculptor's powerful viewing tools.
Overlaying her pre-op image with the simulated outcome makes the differences more apparent.
Help your patient decide on the best possible treatment plan by showing the difference between the likely outcome with single or multiple procedures.
Compare multiple implant scenarios with different size, style and shape options.
As a VECTRA XT owner, your practice is listed in the SculptMyDream sculptmydream.com doctor locator, so that women who are exploring breast augmentation surgery can easily find you.
The ViewMyConsult patient portal gives your patients secure access to their VECTRA 3D images, and your treatment recommendations, with a single click. Now with one step integration of ASAPS Smart Beauty Guide electronic procedural brochures.
Unlimited technical support, hardware warranty, training webinars, software upgrades and ViewMyConsult access.
Canfield Imaging Systems is making every effort to develop software that integrates easily into a HIPAA-compliant practice and to assist our customers in complying with HIPAA.
VECTRA products and features are developed in collaboration with industry leading doctors.View the VECTRA Advisory Panel
An informed patient is the best patient. VECTRA and VISIA are great educational tools. They can get patients excited but also manage their expectations.”
Dr. Gary Tuma on VECTRA”
“VECTRA® 3D is a huge advantage in my practice. My staff loves it. The patients appreciate it. The doctors in the hospital talk about it. It’s so integral to my daily practice that I don’t really know the world without it.”
Gary Tuma, MD FACS, Pennington, NJ
Dr. Oren Tepper, the lead Plastic Surgeon on the recent successful separation of conjoined twins Jadon and Anias McDonald at Montefiore Hospital, relied on Canfield’s VECTRA 3D technology before the surgery. Beginning weeks prior to the surgery Dr. Tepper used the VECTRA to quantify the progress of critical tissue expansion in the twins, ensuring that there would be enough to close the twins’ tissues and thus complete the operation. “I began using VECTRA technology in 2005 while I was a plastic surgery resident. VECTRA 3D images have been an invaluable tool for me while I’m constructing a game plan for complex surgeries. It improves our chances for good outcomes and allows us to objectively measure our options.”
Read more about this inspiring story ”
My objective is to give patients what they're looking for -- something that matches their body. When prospective patients can see an achievable outcome beforehand, and like what they see, then I know I'm going to have a happy patient when we're done with surgery. I believe that surgeons who use VECTRA 3D are offering their patients a valuable service.”
VECTRA 3-D imagery makes patients much more comfortable with their decision to proceed with surgery and gives me a better sense of what’s going to work before surgery so the patient spends less time in surgery. I use the VISIA surface and subsurface imaging for the skin care portion of my practice to educate patients on the overall health of their skin and track their improvements with treatment.”
I do a lot of breast augmentation and secondary breast surgery. VECTRA® has proven to be invaluable when dealing with asymmetry, and helps the patient decide on the implant size that will let them achieve their goals. For rhinoplasty procedures as well, it's been a great adjunct to my consultations and surgical planning.”
VECTRA® 3D is a great tool to help the patient and surgeon arrive at a mutual understanding of surgical goals. My patients appreciate the ability to see what their outcomes can be, using their own 3D photographs, and it gives them the confidence to move forward. And it makes my practice distinctive in terms of what I want my reputation to be.”
Prospective breast augmentation patients see the SculptMyDream simulations on my website, and the first thing they ask when they come in is whether they can be photographed for their own VECTRA 3D simulations. This has created excitement, and a substantially improved mechanism for me to communicate potential outcomes with my patients”
Today's patients expect clear and accurate communications regarding the results we can achieve. That's why I rely on VECTRA® 3D aesthetic simulation for my consultations. I've tried all the 3D systems on the market to see how they would perform in my practice, and VECTRA is head and shoulders above the rest.”
I have been using VECTRA® 3D for three years and it has absolutely transformed my practice. The patients benefit by seeing their results prior to surgery, the surgeon benefits through improved surgical planning and there are obvious marketing benefits for my practice.”
Canfield's VECTRA® 3D face and body imaging system with Sculptor's amazing modeling tools sets the standard for 3D imaging. No other system is as feature rich or even comes close to matching image quality and accuracy. It was the only choice for our practice since we only use the best technology.”
I brought the VECTRA® in with the other partners kicking and screaming, saying that it was never going to help them and wouldn't be worth the cost. And I can tell you that they are now VECTRA's biggest advocates. None of us would want to go back to the way we worked before. I can't believe that I waited this long to incorporate it into our practice.”
I saw VECTRA at the ASPS meeting when it first came out, and immediately realized the implications. This was going to change, even revolutionize, the consultation process, improving patient communications and assuring that we’re on the same page in terms of what they want and what we can do. Today, I don’t know how you could do a consultation without it.”
As an educational tool, VECTRA's® surgical simulations encourage communication between the physician and the patient. In breast augmentation, what really matters is whether the patients understand, accept, and take responsibility for their decisions. For both aesthetic and reconstructive procedures, VECTRA contributes to this understanding easily and effectively.”
I have found VECTRA® 3D to be a valuable consultation tool for breast augmentation as well as reconstruction. Where patients would benefit from a mastopexy, there is no better way of showing them the expected result. And it's essential to a discussion about asymmetry, which we find to some degree in almost every patient.”
If I had to pick one device that has the greatest benefit to the practice and the patient, it would definitely be VECTRA® 3D. It helps my reconstruction patients move forward when they see that I will be able to restore their breasts. You can literally see their faces change from despair to hope.”
VECTRA® 3D gives my patients information that has not been previously available to them. It is a powerful visual comprehensive consultation tool that allows me to better communicate with my patients, better educate them about their procedure and help them understand what they will look like after surgery. The VECTRA solution is not only for breasts, but also face, nose, and body as well. It's a proven clinical imaging solution.”
VECTRA® 3D has definitely brought more patients, increased my conversion rate and improved patient satisfaction. The staff at Canfield's European office in Amsterdam is extremely helpful and their US based technicians can log in to my system remotely whenever I need them. They are always there, and I appreciate that in a company.”
For me, VECTRA® 3D is less about a competitive advantage and less about closing the sale, and more about educating our patients in the best possible way. I also think that it has greatly improved my ability to plan for procedures and that has led to improved efficiencies in the operating room.”
VECTRA® 3D is a great education and communication tool, probably the best one that exists. It realistically shows patients what they should look like after surgery and helps explain the procedure. It's particularly difficult for patients to conceptualize what they will look like after mastopexy. When I found that VECTRA was able to show that, to me that was the clincher.”
VECTRA® 3D has greatly improved my ability to communicate with patients about their anatomy, surgical options, and expected outcomes. When patients have the opportunity to see the potential results of procedures using their own 3D photograph, they are more relaxed and confident in their decisions.”
VECTRA® 3D has been extremely useful in helping me understand the patients' expectations. And when you can educate them about what can and can't be accomplished, you're going to have a higher percentage of satisfied patients. It gives them a comfort level with the decision, and the fact that we've gone the extra mile to educate them enhances their whole experience.”
The ability to communicate visually, without using medical terminology, is a powerful patient education tool. When I show them the simulated results of their procedures, it gives them the confidence that we have a plan that will meet their personal goals.”
Being the first practitioner in my area to have the new VECTRA® system, I found it invariably impresses and intrigues those who see it for the first time. There are now a number of systems in this region and patients have come to expect it as an essential part of the consultation process for breast augmentation and rhinoplasty as well.”
VECTRA® 3D has raised the standard of care for breast consultations, and at this point you would be at a disadvantage if you didn't have it. There is a tremendous leap of faith that patients take before having surgery, and VECTRA helps bridge that leap by giving them a window into what they are going to look like. It's the best communication tool that exists.”
After the first VECTRA® XT consult my nurses and staff immediately saw the value in this system. When the patient saw her breast augmentation 'post-op' image before the surgery, her uncertainty vanished and she couldn't wait to move ahead. We have had the VECTRA system for a year and half now, and we see this scenario every day.”
My patients really respond to VECTRA® 3D simulations. It gives them more confidence in their aesthetic goals, which reinforces their commitment and ultimately helps assure greater satisfaction with the results. Our first VECTRA XT was so effective it paid for itself in only 3 months. The following year we bought another for our branch office”
Breast Sculptor improves doctor-patient communication by allowing them to view and discuss realistic and personal simulations of breast augmentation procedures;
Surgeons have differentiated their practices by offering Breast Sculptor consultations, and it has brought print and broadcast media attention to surgeons across the country. At the same time, these surgeons have seen a substantial increase in conversion rates for breast augmentation procedures.
Face Sculptor currently provides the ability to model in 3D several facial procedures, including;
Face Sculptor software is very easy to use. Graphical instructions, easy adjustment sliders and intuitive software guide the user to ensure that realistic surgical models are easily created. Face Sculptor's convenient viewing tools makes it easy to show your patient the likely outcome from any angle, as well as superimposed over the pre-op image or side-by-side.
Several types of adjustments are provided to enable simulating most surgical and non-surgical procedures. Constrained and unconstrained tools are used to adjust the shape of the face, such as modifying the bridge of the nose, adding filler to the malar pad region and liposuction of the chin and neck. Additional skin texture tools are used to adjust surface changes, such as adding toxins, filling in nasolabial folds and skin resurfacing.
Yes. A patient initially interested in modifications to only one portion of their face, for instance their nose, can also be shown the effects of changes made to a complementary portion of the face such as their chin.
2D images, saved from any angle of the 3D image, can be copied into a printable report for use during surgery. It is also possible to load the 3D image onto a PC located in the operating room, enabling the surgeon to use an electronic copy of the 3D image as a reference.
No. The VECTRA system includes lighting designed specifically for clinical photography, producing images without shadows and with color that matches the patient's own skin tones. No additional lighting is necessary
Yes. Canfield's 3D Mirror Imaging system provides high resolution images, suitable for displaying on large format displays in the surgeon's consultation rooms or office. Even the pores on the patient's skin are displayed
Face Sculptor software comes as part of a complete turn-key solution suitable for professional Face Sculptor consultations. This solution includes the VECTRA High Resolution 3D Capture System, 3D Mirror software, computer, and one day of installation and training.
Yes. Face Sculptor may be run from a computer other than the one provided with your turn-key system. The high quality Face Sculptor images may require additional graphic card performance. Contact Canfield Imaging Systems to see if your computer is adequate for running Face Sculptor. If not, we can make recommendations for computers or upgrades best suited for this purpose.
Face Sculptor will enhance your patient's consultation experience, helping them visualize their hopes and expectations by;
This will increase conversion rates, help ensure post-surgery satisfaction and generate more patient referrals.
Breast Sculptor and 3D Mirror systems are manufactured in the United States by Canfield Imaging Systems, Fairfield, NJ. To purchase a system in the US, obtain more information, or identify a distributor in your country, contact us at +1.973.276.0336 or by email at email@example.com.
Breast Sculptor software is very easy to use. Its wizard-like interface guides the user through three quick and easy steps to create a realistic outcome.
Breast Sculptor's convenient viewing tools makes it easy to show your patient the likely outcome from any angle, as well as superimposed over the pre-op image or side-by-side. You may also elect to have Breast Sculptor generate a custom report with pre-op photos, breast measurements and implant selection information.
Primarily, the landmarks are used to enable Breast Sculptor to provide key measurements used for implant selection. However, the landmarks are also used to help the software identify where the patient's chest wall is located for purposes of creating the modeled outcome.
Breast Sculptor provides the ability to select the implant brand, fill type (gel or saline), profile, shell (smooth or textured), volume, and in the case of saline implants the amount of fill added. The manufacture's catalog number is provided. You may also select different implant parameters for each breast to help address breast asymmetry.
All patients exhibit some level of asymmetry. In some cases, the level of asymmetry is large enough that it should be addressed during augmentation surgery. Breast Sculptor conveniently provides an indication of asymmetry by showing the difference in volume between the two breasts. The user can then make adjustments to the implant parameters, including volume and profile changes to deal with the asymmetry.
Breast Sculptor includes the ability to model the lifting of the breast in conjunction with an augmentation. The process is done directly after the implants are modeled and before the final outcome is created. This enables the user to provide a comparison to the patient of what the augmentation would look like with or without the lift.
Yes. The software provides the ability for the surgeon to make easy adjustments to ensure the simulation matches what the surgeon considers the expected outcome to be.
Yes. Canfield's VECTRA 3D Imaging system provides high resolution images, suitable for displaying on the largest displays. Even the pores on the patient's skin are displayed.
Breast Sculptor software comes as part of a complete turn-key solution suitable for professional Breast Sculptor consultations. This solution includes the VECTRA III High Resolution 3D Capture System, 3D Mirror software, computer, and one day of installation and training.
Yes. Breast Sculptor can be run from a computer other than the one provided with your turn-key system. Of course, the high quality Breast Sculptor images require additional graphic card performance. Contact Canfield Imaging Systems to see if your computer is adequate for running Breast Sculptor. If not, we can make recommendations for computers or upgrades best suited for this purpose.
Face Sculptor and 3D Mirror systems are manufactured in the United States by Canfield Imaging Systems, Parsippany, NJ. To purchase a system in the US, obtain more information, or identify a distributor in your country, contact us at +1.973.434.1201 or by email at firstname.lastname@example.org.